EN
www.magmaweld.com
ID 400E
15
USER MANUAL | KULLANIM KILAVUZU
Installation
When inserting the plug into the wall socket, the machine Make sure it is in the “0” position.
2.6 Connecting To The Mains
• Check the 3-phase with a voltmeter before connecting the machine to the mains. After detecting
that each phase is 400V (± 40V), plug in the plug.
• Switch on the machine with the On / Off switch.
• Turn off the machine by turning the switch back to the “0” position after hearing the fan noise and
seeing the voltmeter and ammeter light on.
Figure 3: Mains Connection
