Magma EB3600-10, User Manual

Page: 123 / 143

Magma
EB3600-AB | Chapter 7 Rack Slide Installation 123
Add Screws to Rack Post (STEP 4)
Attach 2 Panhead screws into the rack post where you want the chassis mounted. Be sure you have
measured accurately to ensure that everything fits in the rack correctly. Leave the screws enlightened until
after you place the slide rail’s fingers (Step
5 ) between the screws as shown. If your rack has holes too large
for the screws, you can use the Bar Nut to secure your mounting by inserting the Panhead screw through
the rack hole and screwing it into the Bar Nut on the reverse side of the rack post, as shown. Notice that the
holes on the Bar Nut are spaced unevenly to accommodate different racks.
Attach Slide Rail to Rack (STEP 5)
Attach to inside of rack with “fingers” pointing “out” and the end bracket to the rear. Secure each Slide
Mount with 4 screws as shown below.