Magio MG-968, Instruction Manual

Page: 22 / 26

22
Control panel
Before first use
Operation
Re-boiling button
Unlock button
Temperatue set
button
Dispense button
Timer button
Boiling indicator Keep warm indicator
EN
• Do not repair the appliance by yourself. It may lead to a fire, electric shock or injuries.
If there are some damages in the device apply to the authorized service center by
the contact addresses indicated in the warranty card or on the website www.magio.
ua.
• To protect the environment, when the operating life of the oven came to the end, do
not dispose the device with household waste, but take it to a designated collection
point for recycling.
• Store the appliance in a cool dry place out of the reach of children and people with
disabilities.
• The device should only be transported in its original packaging.
After transportation or storing the device at a low temperature, keep it at room
temperature for three hours at least.
1. Check the integrity of the device. If it is damaged, do not use it.
2. Remove all the stickers and packing materials that are obstructing the device
operation.
3. Wipe carefully the inside of the appliance with a wet cloth.
1. Unpack the thermo pot.
2. Before switching on make sure that your home electricity supply corresponds to
the voltage of current specified on the housing.
3. Open the lid (2), by pressing the front edge of upper lid lock button located on it.
Lift up by pulling it forward until the top cover opens (figure below).