6
Do not operate camera whilst running or driving.
You could fall or cause a traffic
accident.
Only use a power supply (not supplied) with the input voltage (6V, min. 500 mA)
specified on the rating plate.
No liability shall be accepted for damage caused by
the use of an incorrect power supply.
The 230V socket used for the power supply
must be accessible at all times so that
the power supply can be quickly disconnected from the mains if necessary.
Ensure adequate ventilation and do not cover the power supply (not supplied) to
prevent overheating.
Do not place any open ignition sources, such as lit candles onto or close to the
device.
Ensure that the
LCD display is not subjected to impacts or concentrated
pressure.
This could damage the glass of the display or cause the display liquid to
leak out. In case of the liquid coming into contact with eyes or skin, rinse
immediately with clean water. In case of contact with eyes, consult doctor
immediately.
Damage to the electronics or housing caused by external influences, such as
electric shocks, falls or others are not covered by the warranty and shall thus be
charged for.
Do not drop or bump camera a
nd always handle with due care as the camera
could otherwise be damaged.
