24
•
Timer 1 and timer 2:
On
/Off
Set one of the two timers to
ON
if the camera should only be activated for a certain
period during the day. As soon as you have confi rmed
ON
by pressing the
OK
button, a start and end time can be set.
If the start time is, for instance set to 6.35 pm and the end time to 8.25 am, the
camera will be operational from 6.35 pm of the current day until 8.25 am of the
following day. The camera is not triggered and does not record any photos/videos
outside of this period. If times set for the timers are overlapping, both settings shall
be eff ective.
•
Password protection:
On
/Off
After selecting
ON
, enter a four-digit password to protect your camera against
unauthorized access. The password is requested each time the camera is switched
on in the Test mode before the camera can be used.
If you have forgotten the password and are unable to use the wildlife camera, the
camera must be returned to our Service department together with the till receipt.
This is the only way to ensure that no unauthorized access occurs
.
•
Serial number: On/Off (can only be used for photos, not for videos)
Select
ON
to enter a serial number for your camera. You can use a combination of
4 digits and letters to document the location on the photos (e.g.YSP1 for Yellow
Stone Park). This makes it easier for users of several cameras to identify the location
when viewing photos.
•
Time-lapse function: On/Off
If set to
ON
, the camera automatically records photos/videos depending on the
chosen time interval, irrespective of whether the PIR sensor has detected wildlife
or not. This feature is advantageous when recording cold-blooded animals, such as
snakes or blooming plants, etc.
After confi rming
ON
by pressing the
OK
key, the time interval can be set.
