Page 14
2.5.2. Pebble Effect Layout (Natural Gas Only)
The fire is supplied with ceramic pebble sets
as follows:-
S16
S18
Large Pebbles
(A, B & K)
15 20
Medium Pebbles
(C, D & F)
8 6
Flat Pebbles
(H)
4 4
Front Pebbles
(E)
6 7
Aeration Tubes
4
6
½ Aeration Tubes
1
0
For models MS16 and ST16 refer to
.
For models MS18 and ST18 refer to
.
NOTE: When placing pebbles on the tray
ensure the lettering on them is facing down
and into the fire. After every step of pebble
laying ensure that they are stable.
Proceed with the pebble layout as follows:-
1. Unpack the
aeration tubes, Pebbles H
& E
and place them on the tray as
shown in the relevant figure ensuring
that the burner port and path to the pilot
assembly remain clear as shown. Note
that the aeration tubes should be placed
on their back, with the legs facing up.
2. Unpack Pebbles
A, B & K
and position
as shown.
3. Unpack
Pebbles
C, D & F
(if applicable)
and using the remaining
A, B & K
pebbles, form the final layers.
4. Small adjustments to the top layer may
be made to alter the flame pattern if
desired flame after the fire has been
turned on. A small pair of tongs should
be used for this.
5. It is recommended that the pebbles be
left alone once the desired flame pattern
has been achieved.
Constant moving
of the pebbles causes the pebbles to
disintegrate and/or cause
discolouration
.
