Page 17
2.5.3. Beachcomber Effect and Shoreline Effect Layout
The fire is supplied with ceramic pebble and
driftwood set as follows:
Pebbles
Qty
Large Pebbles (A, B & K) 7
Medium Pebbles (C, D & F) 5
Small Pebbles (E/J)
11
Matrices 2
Driftwood
Figure 32
NOTE: When placing pebbles and driftwood
on the burner tray, ensure that the lettering
on them is facing down and towards the fire.
After every step of pebble and driftwood
laying, ensure that they are stable.
1. Having unpacked all the fuel-bed
components proceed with placing the
rear matrix
pieces centrally and to the
rear of the burner tray ensuring that it
touches the ceramic fire-back (see
Figure 33
).
2. Place
the
middle matrix
pieces onto the
burner board so that they key into the
triangular depression on the board (see
Figure 33
).
3. Insert the front fuel spike between the
board and the front of the metal tray (see
Figure 33)
.
4. Insert the
J & E
pebbles centrally onto
the spikes and place the
B
,
C
&
D
pebbles on the middle matrix ensuring
the same orientation as shown in
Figure
34.
Rear matrix
Middle Matrix
Front Fuel Spikes
Burner Board
Figure 33
C
B
B
B
D
J
J
J
J
J
E
D
Figure 34
A
C
G E
B
K
J
