![background image](http://html1.mh-extra.com/html/magicfx/stadiumshot-iii/stadiumshot-iii_user-and-installation-manual_3502493028.webp)
28 MAGICFX
®
STADIUMSHOT III
—
User and Installation Manual
5.
Enjoy the view!
6.
Turn the enable address and the effect channel back to 0.
7.
Set the safety key in the OFF position to disarm the ARM SYSTEM and disable
operation of the STADIUMSHOT III and other connected SFX machines.
If pyro is used, follow the next steps:
1.
Make sure that the prescribed safety zone is free from persons and objects.
2.
Set the safety key on the ARM CONTROLLER in the ON position. The FX LED lights
in red, indicating the system is now armed and the STADIUMSHOT III and other
connected SFX machines are ready to be operated.
3.
Activate the pyro controller.
4.
Enjoy the view!
5.
Deactivate the external low voltage pyro controller (24V).
6.
Set the safety key in the OFF position to disarm the ARM SYSTEM and disable
operation of the STADIUMSHOT III and other connected SFX machines.
3.6
USE THE EMERGENCY STOP
1.
When an emergency occurs or is about to occur with the STADIUMSHOT III, you
press the emergency stop button on the ARM CONTROLLER or on an external
E-STOP (if present). As a result the pressurized air can’t leave the tank and any
related hazard/or property damage is stopped and prevented.
2.
Set the safety key on the ARM CONTROLLER to the OFF position.
3.
Resolve the emergency situation and inspect the STADIUMSHOT III.
4.
Release the emergency stop and perform a reset. For instructions, refer to the
ARM CONTROLLER User and Installation Manual (PART01882).
5.
If DMX is used, set the enable and effect channel back to 0.