![background image](http://html1.mh-extra.com/html/magic/105/105_manual_3431660023.webp)
23
G
B
FIG. 7 - TRANSMISSION LEVER OFFSET UP TO 45 mm FROM THE GATE HINGES
A - DO NOT USE
B
- Weld to the gate with the pivot, as shown in Fig. 7
FIG. 8 - TRANSMISSION LEVER GATE LOAD-BEARING SUPPORT
A
- Use only when the gate weighs excessively on the motor.
B
- Weld with the pivot inserted half-way into the transmission lever slot, as shown in Fig. 8
7
8
WATER DRAIN
WELD
POWER CABLE
WELD
Summary of Contents for 105
Page 45: ...45...