Magic-Pro MP-VIP4 User Manual Download Page 4

Page: 4 / 43

Contents

JP7, JP8: Chipset Clock Settings ----------------------------------

IDE LED Activity Light: (J1 pin1Ð4)------------------------------

Infrared Port Module Connector (J1 pin6Ð10) -----------------

J1 pin12, 13: ATX Power Button ----------------------------------

J1 pin14, 15: Reserved -----------------------------------------------

Speaker Connector (J2 pin1Ð4) ------------------------------------

Reset Switch (J2 pin5, 6)---------------------------------------------

Power LED and Keylock Switch (J2 pin8Ð12)------------------

Turbo LED (J2 pin14, 15)--------------------------------------------

USB: USB Connector ------------------------------------------------

J1 Switch Signal Summary -----------------------------------------

J2 Switch Signal Summary -----------------------------------------

Chapter 3: BIOS Setup ---------------------------------------

Standard CMOS Setup ----------------------------------------------------

BIOS Features Setup -------------------------------------------------------

Chipset Features Setup ---------------------------------------------------

Power Management Setup -----------------------------------------------

PnP/PCI Configuration Setup ------------------------------------------

Load Setup Defaults -------------------------------------------------------

Integrated Peripherals ----------------------------------------------------

Supervisor/User Password ----------------------------------------------

IDE HDD Auto Detection ------------------------------------------------

Save & Exit Setup ----------------------------------------------------------

HDD Low Level Format --------------------------------------------------

Exit Without Saving -------------------------------------------------------

Summary of Contents for MP-VIP4












































Search results

Summary of Contents for MP-VIP4

Reviews:

Related manuals for MP-VIP4

Brands by name

Popular brands

Magic-Pro MP-VIP4, User Manual

Search results

Summary of Contents for MP-VIP4

Reviews:

Related manuals for MP-VIP4

Brands by name

Popular brands