Award BIOS Setup 35
IDE HDD Block
Mode
Choose Enabled (default) or
Disabled. If your hard disk size is
larger than 540MB, choose Enabled,
and, if you are using the IDE HDD
Auto Detection option, the BIOS
will choose this option
automatically. (Note: Some old
HDD models donÕt provide this
feature.)
IDE Primary
Master/Slave PIO
IDE Secondary
Master/Slave PIO
Choose Auto (default) or Mode 0~4.
The BIOS will detect the HDD Mode
type automatically when you
choose Auto. You need to set to a
lower mode than Auto when your
hard disk becomes unstable.
IDE Primary
Master/Slave
UDMA
IDE Secondary
Master/Slave
UDMA
Choose Disabled or Auto (default).
Auto:
Automatically detects
the HDD Ultra DMA
function.
Disabled: Disabled the HDD Ultra
DMA function.
Onboard FDD
Controller
Choose Enabled (default) or
Disabled. Choose Disabled when
you use an ISA card with FDD
function, or , choose Enabled to use
the onboard FDD connector.
Onboard UART1
Choose Auto (default), 3F8/IRQ4,
2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, or
Disabled.
Do not set port 1 & 2 to the same
value except for Disabled.
Onboard Serial
UART2
Choose Auto (default), 3F8/IRQ4 ,
2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, or
Disabled.
