38
When set to ON, any event occurring to the DMA controller will awaken
a system which has been powered down.
3.5.14 Modem Ring Resume (Disabled)
When set to Enabled , any event occurring to the Modem Ring will
awaken a system which has been powered down.
3.5.15 RTC Alarm Resume (Disabled)
When set to Enable, you could set the date (of month) and timer
(hh:mm:ss), any event occurring at will awaken a system which has been
powered down.
3.5.16 Date (of Month) Alarm, Time (hh:mm:ss) Alarm
Set these options to specify the RTC Alarm time on Date / Hour / Minute
/ Second.
3.5.17 Primary INTR (ON)
When set to ON, any event occurring at will awaken a system which has
been powered down.
The following is a list of IRQ’s, Interrupt ReQuests, which can be
exempted much as the COM ports and LPT ports above can. When an I/O
device wants to gain the attention of the operating system, it signals this
by causing an IRQ to occur. When the operating system is ready to
respond to the request, it interrupts itself and performs the service.
When set On, activity will neither prevent the system from going into a
power management mode nor awaken it.
IRQ3 (COM 2 )
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
