29
NOTE:
Many disk diagnostic programs which attempt to access the
boot sector table can cause the above warning message. If you
will be running such a program, we recommend that you first
disable Virus Protection beforehand.
3.3.2 CPU Internal/External Cache (Enabled)
These options are to enable or disable CPU Internal
¡ ]
L1
¡ ^
Cache, or
External
¡ ]
L2
¡ ^
Cache.
3.3.3 Quick Power On Self Test (Enabled)
This category speeds up Power On Self Test (POST) after you power up
the computer. If it is set to Enable, BIOS will shorten or skip some check
items during POST.Select
3.3.4 Boot Sequence (C,A,SCSI)
This option allows user to assign boot sequence of the system. Available
options are A, C, D, E, F, CD-ROM, SCSI and LS120/ZIP.
3.3.5 Swap Floppy Drive (Disabled)
When enabled, physical drive A will be assigned to logical drive B, and
physical drive B will be assigned to logical drive A.
3.3.6 Boot Up Floppy Seek (Disabled)
The system will detect and verify operation of the floppy drive type .
3.3.7 Boot Up Numlock Status (On)
The option allows the
¡ Õ
NumLock
¡ Ö
key to be activated after system
boot up.
3.3.8 Gate A20 Option (Fast)
This entry allows you to select how the gate A20 is handled. The gate A20
is a device used to address memory above 1 Mbytes.
