37
3.5.6 Soft-off by PWRBNT (Instant-Off)
When set to “Delay 4 Sec.”, the ATX switch can be used as a normal
system power-off button when pressed for less than 4 seconds. “Instant-
Off” disables the ATX switch function when the button is pressed under 4
seconds.
3.5.7 HDD Power Down (Disabled)
When enabled and after the set time of system inactivity, the hard disk
drive will be powered down while all other devices remain active.
3.5.8 Doze Mode (Disabled)
When enabled and after the set time of system inactivity, the CPU clock
will run at slower speed while all other devices still operate at full speed.
3.5.9 Suspend Mode (Disabled)
When enabled and after the set time of system inactivity, all devices
except the CPU will be shut off.
3.5.10 VGA (OFF)
When set to ON, any event occurring at a VGA port will awaken a system
which has been powered down.
3.5.11 LPT & COM (LPT/COM)
When set to LPT/COM, any event occurring at a COM(serial)/LPT
(printer) port will awaken a system which has been powered down.
3.5.12 HDD & FDD (ON)
When set to ON, any event occurring at a hard or floppy drive port will
awaken a system which has been powered down.
3.5.13 DMA/master (OFF)
