30
3.3.9 Typematic Rate Setting (Disabled)
This determines if the typematic rate is to be used. When disabled,
continually holding down a key on your keyboard will generate only one
instance. In other words, the BIOS will only report that the key is down.
When the typematic rate is enabled, the BIOS will report as before, but it
will then wait a moment, and, if the key is still down, it will begin the
report that the key has been depressed repeatedly. For example, you
would use such a feature to accelerate cursor movements with the arrow
keys.
3.3.10 Typematic Rate (6)
When the typematic rate is enabled, this option to set the rate at which a
character keeps repeating while you hold down a key.
3.3.11 Typematic Delay (250)
When the typematic rate is enabled, this selection allows you to select the
delay between when the key was first depressed and when the acceleration
begins. Available options are "250", "500", "750", and "1000".
3.3.12 Security Option (Setup)
You can select whether the password is required every time the system
boots or only when you enter the Setup. You can assign "Supervisor
Password" and "User Password" in the main CMOS Setup Utility Screen.
3.3.13 PCI/VGA Palette Snoop (Disabled)
Enable this option to correct screen color shifts, when there is a
combination of VGA cards, accelerator cards, or MPEG cards present.
3.3.14 OS Select for DRAM
¡ Ö
64MB (Disabled)
If you are using OS/2 operating system and installed memory is larger
than 64MB. You need to have the setting in the enable mode.
