Page 19
6.5.8 Accessory Mode
If you are in Drive Mode, a press of the accessory mode
selection button will take you to the last used accessory
function, e.g. actuator control. If you are already in Accessory
Mode, a press of the accessory mode selection will take you to
the next available accessory mode, e.g. lighting. To return to
Driving, simply press the drive profile selection button.
Only actuators that have been enabled are
detected and shown.
The next actuator can be selected by moving the
joystick to the left or to the right or by using the
function button
6.5.9 On Board Programming
The On Board Programming (OBP) can be used to
make the following adjustments using the joystick
controller.
