25
Changing battery
below with your index finger and thumb and pull
it forward
(see figure 2)
. You will find the battery
compartment below
(C)
.
• Insert a new 1.5 V LR03/micro/AAA battery into
the battery compartment
(C)
, making sure that
you insert them the right way round
(see figure 3)
.
• Please pay attention to the flashing signals of the
device LED while inserting the batteries (see „6.4
Error codes and flashing sequences“ on page
28).
• Put the cap
(D)
back to the electronic unit
(B)
.
Once the battery has been inserted, the window / door
contact will perform a self-test (approx. 2 seconds). Af-
terwards, initialisation is carried out. The LED test display
will indicate that initialisation is complete by lighting up
orange and green.
Never recharge standard batteries. Do not throw
the batteries into a fire. Do not expose batteries
to excessive heat. Do not short-circuit batteries.
Doing so will present a risk of explosion.
Used batteries should not be disposed of with
regular domestic waste! Instead, take them to
your local battery disposal point.
Summary of Contents for HMIP-SWDO-TK
Page 2: ...3 2 8 6 5 4 7 3 mm 3 mm ...
