28
MagCore®
EDA
6
9
7
Click the
Auto Primary Scan
option.
If require, EDA can auto-scan the primary tubes.
* Make sure the barcode is facing the right direction.
The built-in scanner will automatically scan the
barcode.
Pull out the A zone drawer, and then slowly push in.
8
Confirm and check all your setup, move on to B
Zone to setup PCR assay.
Choose one of the three mode from
Manual, PCR
Kit
and
Automatic
.
10
*
For more detailed information about the modes,
please refer to Page. 20.
Set up the value for your
Sample Number,
Positive/ Negative Control, NTC
and
Standard
Number
. and their
Tube Type
.
* The
mark means that some units have not been set up.
