11
Operation -
Getting the most out of Your Mag Charger® Rechargeable Flashlight System
Section 5
Operation -
Getting the most out of Your Mag Charger® Rechargeable Flashlight System
How To Go From One Function Set To Another
Your Mag Charger® flashlight’s “standard” setting is
Function Set #1.
If you want
to keep that setting you don’t have to do anything.
Function Set #1
will always be
in effect unless it is changed. If you want to choose a different function set,
follow these steps:
1. Unscrew the tail cap,
backing it out of the barrel
far enough that the
flashlight will not turn on.
(Note: This may require
the tailcap to be removed
from the barrel entirely).
2. Pause for 2 seconds.
3. Press the switch button
and
keep holding it down.
4.
While still holding down the switch button
,
screw the tail cap back in until it is tight.
5.
Keep holding down the switch button.
Within about 4 seconds the flashlight will
start to blink.
6. The number of blinks indicates the new selected Function Set.
7. To choose a new Function Set, release the switch button after the
corresponding number of blinks (releasing after 1 blink chooses
Function Set #1
;
releasing after 2 blinks chooses
Function Set #2
;
release after 3 blinks for
Function
Set #3
,
and release after 4 blinks to choose
Function Set #4.)
Your choice of a
Function Set remains in effect until you change it by repeating the above
process. (See our Demo video at www.maglite.com)
몇
NOTICE:
To avoid deeply discharging the rechargeable NiMH battery,
always turn the flashlight off when the flashlight beam starts to dim or
turn yellow. A dim or yellow beam is an indication that the battery needs
to be fully recharged. In this case, allow the battery to charge for a full 16
hours.
Spot-to-Flood Beam
Quick focusing “continuous cam-action” spot-to-flood beam. Operates with
a simple quarter turn of the flashlight head assembly.
