2
Figure 1 - Model JSA500MA Components
Save these instructions.
For your safety, read, understand, and follow the information provided with and on this
jack. The owner and operator of this equipment shall have an understanding of this jack and safe operating procedures
before attempting to use. The owner and operator shall be aware that use and repair of this product may require
special skills and knowledge. Instructions and safety information shall be conveyed in the operator's native language
before use of this jack is authorized. If any doubt exists as to the safe and proper use of this jack, remove from service
immediately.
Inspect before each use.
Do not use if broken, bent, cracked, or damaged parts (including labels) are
noted. Any jack that appears damaged in any way, operates abnormally or is missing parts, shall be removed from
service immediately. If the jack has been or suspected to have been subjected to a shock load (a load dropped
suddenly, unexpectedly upon it), immediately discontinue use until jack has been checked by an authorized service
center. It is recommended that an annual inspection be done by qualified personnel. Labels and Owner's Manuals are
available from manufacturer (see Replacement Parts, page 6 and 7).
PRODUCT DESCRIPTION
Mac Tools Lightning Lift
Hydraulic Service Jacks are designed to lift,
not
sustain, rated capacity loads. They are
designed to be used in conjunction with jack stands. Lightning Lift Service Jacks have a unique feature that automatically
provides a fast, no load lifts to the jacking point.
Intended use:
To lift one wheel or axle of a vehicle for the purpose of
service and/or repair of vehicle components. After lifting, loads must be immediately supported by appropriately rated
jack stands. Check with vehicle owner's manual for proper lift points.
DO NOT USE AS A WHEEL DOLLY !
Note: Never use foot pedal to raise load !
Figure 2 - Model JSA1000MA Components
SPECIFICATIONS
Model
Capacity
Jack Size ( L X W X H )
Min. Height
Max. Height
JSA500MA
5 Ton
52 1/2" x 17 1/8" x 7 1/4"
6 1/2"
22 1/4"
JSA1000MA
10 Ton
6 7/8"
27"
51 1/2" x 18 3/8" x 9 5/8"
Handle Position
Lock
Release Valve
(Handle Knob)
Handle
Saddle
Front Wheel
Oil Filler Screw
(on reservoir)
Caster
Foot Pedal
Handle Sleeve
Handle
Saddle
Front Wheel
Oil Filler Screw
(on reservoir)
Caster
Foot Pedal
Handle Sleeve
Release Valve
(Handle Knob)
Handle
Position
Lock
