MAFI MT 25, Operating Manual

Page: 98 / 144

HANDLING
STARTING CHECK
96 Operating Manual MT 25 / 30 YT
Reading out oil level at “Oil level mode” display
The transmission is equipped with an oil level sensor. You can
read out the oil level and the oil level sensor errors on the “Oil
level mode” display in the operating panel for the transmission.
X
Make sure that the oil has reached the normal operating
temperature between 60 °C and 93 °C.
The operation temperature can be read from the tempera-
ture indicator in the multi-function display.
The operational temperature is reached when the transmis-
sion has run under load for at least one hour.
X
Park the MT on level ground for the oil level check.
X
Shift the transmission into neutral N and apply the parking
brake.
X
Let the engine run at low idle speed (500 to 800 rpm).
Read oil level
Fig. 91: Operating panel
1 Arrow key down
2 Arrow key up
3 Display “Oil level mode”
X
Press the two arrow keys 1 and 2 once at the same time.
After about two minutes, you can read the oil level in the
display
3 .
I f o n e o f t h e a b ove - m e n t i o n e d c o n d i t i o n s fo r o i l l eve l
m e a s u r e m e n t i s n o t f u l f i l l e d , t h e c o m p u t e r s t o p s t h e
m e a s u r i n g o r t h e c o u n t d ow n a n d s h ow s t h e o i l l eve l
s e n s o r e r r o r o n t h e d i s p l ay.
M
O
N
I
T
O
R
R
N
D
S
E
L
E
C
T
MODE
11-C25-0 67 -0 8 4A-9
1
2
3
Oil level indicator Explanation
oL ok Oil level is OK (Oil Level ok)
oL Lo 1 Oil level 1 litres too little Low = low
oL Lo 2 Oil level 2 litres too little
etc.
oL HI 2 Oil level 2 litres too much High = high
oL HI 3 Oil level 3 litres too much
etc.