MAFI MT 25 Operating Manual Download Page 65

Page: 65 / 144

OPERATION

INSTRUMENT PANEL

Operating Manual MT 25 / 30 YT

Air-cushioned rear axle

Fig. 49: Bellows

You can lower the vehicle frame in order to take up parked low
trailers. Lowering is done by letting out the air of the air sus-
pension bellows of the rear axle.

Lowering the vehicle frame

Fig. 50: Air suspension button

Press the button and hold it down.

The vehicle frame is lowered.

After releasing the button the air suspension bellows are
inflated again and the vehicle frame is raised again to the
normal level.

Joystick for fifth wheel

Fig. 51: Joystick for fifth wheel

Joystick

Button

Lowering

Lifting

You can lift and lower the fifth wheel using the joystick.
The button

of the joystick has no function in the standard

model.

Lowering

Press the joystick in the direction of the arrow

The fifth wheel coupling is lowered.

Lifting

Press the joystick in the direction of the arrow

The fifth wheel coupling is lifted.

Summary of Contents for MT 25

















































































































































Search results

Summary of Contents for MT 25

Reviews:

Related manuals for MT 25

Brands by name

Popular brands

MAFI MT 25, Operating Manual

Search results

Summary of Contents for MT 25

Reviews:

Related manuals for MT 25

Brands by name

Popular brands