K85Ec / KSS80Ec 370
01/2022
21
5.7
Setting for bevel cuts
For bevel cuts, the saw unit can be set to any angle from 0° to 60°.
Use the following procedure to set the saw unit
for bevel cuts:
1.
For tilting, put down and support the machine
so that the saw unit can be tilted.
2.
Loosen the wing screw (10).
3.
Use the scale (9) on the tilting segment to set
the angle.
4.
Tighten the wing screw (10).
✓
The saw unit is set to the desired angle
for the bevel cut.
Fig. 17: Setting the saw unit for bevel cuts