background image

-19-

1 Signs and symbols

This symbol appears at places where you will find instructions for your
own safety.

Non-compliance with these instructions may result in very serious injuries.

This symbol indicates a potentially hazardous situation.

If this situation is not avoided, the product or objects in its vicinity may get
damaged.

This symbol indicates tips for the user and other useful information.

2 Product information

in respect of machines with item No. 919601, 919620, 919621, 919622, or 919625

2.1 Manufacturer´s data

MAFELL AG, Beffendorfer Straße 4, D-78727 Oberndorf / Neckar, Phone +49 (0)7423/812-0, Fax +49
(0)7423/812-218

2.2 Machine identification

All details required for machine identification are available on the attached rating plate.

Protection class II

CE symbol to document compliance with the basic safety and health
requirements according to Appendix I of the Machinery Directive.

For EU countries only
Do not dispose of electric tools together with household waste material!
In accordance with the European directive 2002/96/EC on waste electrical and
electronic equipment and transposition into national law, obsolete electrical
tools must be collected separately and recycled in an environmentally-
compatible manner.

To reduce the risk of injury, please read the operating instructions.

Summary of Contents for DSS300cc
















Reviews: