Mafell 91C501, Translation Of The Original Operating Manual

Page: 16 / 122

-16-
2.3 Technical data
Universal motor, radio and TV
interference suppressed 230 V~, 50 Hz
Power input (nominal load) 1000 W
Current at nominal load 4.6 A
Idling speed 4,000 - 25,000 rpm
Tool holding fixture with collet ø 8 mm (0 5/16 in.)
Tool shank maximum 8 mm (0 5/16 in.)
Tool shank minimum 3 mm (0 1/8 in.)
Milling cutter Ø, maximum 30 mm (1 3/16)
Weight without mains cable 2.1 kg (4.63 lbs)
Length of connecting cable 4 m (13 1/8 ft.)
Dimensions (W x L x H) 103 x 226 x 328 mm (4 1/16 x 8 57/64 x
12 29/32)
2.4 Emissions
The declared noise emission values have been measured in accordance with DIN EN 62841-1 and may be used
for comparing the tool with another and also in a preliminary assessment of exposure.
Danger
The noise emissions during actual use of the power tool can differ from the declared
values depending on the ways in which the tool is used especially what kind of
workpiece is processed.
Always wear hearing protection, even when the power tool ist running idle in addition
to the trigger time!
2.4.1 Noise emission specifications
Noise emission values determined according to EN 62841:
Sound pressure level L
PA
= 71 dB (A)
Uncertainty K
PA
= 3 dB (A)
Sound power level L
PA
= 82 dB (A)
Uncertainty K
PA
= 3 dB (A)
The noise measurement was done without tool at idling speed.
2.5 Scope of supply
Edge cutter KF1000 complete with:
1 milling table, complete
1 face-milling cutter ø 19 mm
1 collet Ø 8 mm
1 open-ended spanner AF 17
1 operating manual
1 folder "Safety Instructions"