background image

 

17. Warranty 

17.1 The High pressure cleaner has 

twelve-month

 warranty

 from the date of delivery. 

Defects and vices connected or consequent to not compliance with the indications contained in this manual 
ARE EXCLUDED FROM THE WARRANTY. 
17.2 MAER  Guarantees  the mechanical  parts  of  the machine,  under  normal  conditions  of  use  and  service; 
this warranty does not include accessories and usage materials. 
The warranty is intended for substitution of the faulty part. 
Transport and installation of the new part are at customer’s charge. 
17.3 In case of return of the high pressure cleaner, please enclose a sheet with the reasons of returning and 
the type of malfunction. 
17.4 No modifications can be made to the high pressure cleaner. 
In case of modifications made by the customer, the warranty lapses. 
17.5 The MAER company disclaims all responsibility for damages to persons and/or things deriving from use 
of single parts of the machine, if they have been run or assembled differently from the original condition. 
 
 

18. Additional instructions 

18.1 Instructions of emergency conditions : 
 
1 Switch off the machine 
2 Disconnect the electricity supply 
3 Call the public assistance 
 
 
18.2 ACCESSORIES : 
The high pressure cleaner can be provided with proper accessories which allow to use the machine to scale, 
sandblast disinfect and unblock. 
 
To scale                  Rotating nozzle 
To sandblast           Sandblasting head 
To disinfect             Foaming nozzle 
To unblock              Unblocking nozzle  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for LASER Series













Reviews: