www.madur.com
Manual
GA-21Plus
5.8. Data-logger
A data-logger is an instrument that measures variables that have been converted
to an electrical signal and stores them for later evaluation.
The inclusion of analogue inputs as shown below and the possibility of storing
these results enables the
GA-21
plus
to operate as a data-logger as well.
The analyser is fitted with the following inputs:
- current or voltage (mA / V)
- thermocouples (Ni-CrNi / Pt-RhPt / Fe-CuNi)
- resistance thermometer (Pt100 / Pt500/KTY-2k)
The signals registered by the analogue inputs can either be read from the
DATA
screen or be stored continuously in a bank.
The
madCom
software can then be used for further treatment of these results.
Warning: The ground (GND) of all analogue inputs is connected to the in-
strument ground.
5.9. Printer
5.9.1. Printing the contents of a screen
This is not possible for the screen
(D1)
. A screen may not be printed whilst data is
being entered using the alphanumeric keyboard until this activity has been ended.
-
prints the contents of a screen
5.9.2. Printing of all results
-
open the first results screen
(D1)
-
start a print-out containing all measured results
If the current values are displayed they will be printed; if the averaged values are
displayed then these will be
printed.
56
