MADRIX LUNA 16 Page 7 User Manual Download

Page: 7 / 115

[Part 1] Overview

//7

www.madrix.com

MADRIX LUNA User Manual

LED Status Codes

The following tables describe the LED status codes on the front of the device.

STATUS

POWER

Powered off

Power cable not connected.
> The device has no power.

Permanently

green

Connected to power.
> The power is on.

STATUS

ETHERNET

USB

Powered off

Ethernet not connected
or the device has no power.

USB not connected
or the device has no power.

Permanently

green

Connected to Ethernet.
> No data is sent or received over Ethernet.

Connected to USB.
> No data is sent or received over USB.

Blinking

green

Communicating over Ethernet.
> Sending or receiving data over Ethernet.

Communicating over USB.
> Sending or receiving data over USB.

STATUS

DMX-IN

DMX-OUT

Powered off

DMX not connected
or the device has no power.

Blinking

green

Receiving data via DMX-IN.
> The device works correctly.

Sending data to DMX OUT.
> The device works correctly.

Automatic HTP Merging

Overview

MADRIX LUNA features automatic HTP merging from 2 Ethernet sources.

Summary of Contents for LUNA 16




















































































































Search results

Summary of Contents for LUNA 16

Reviews:

Related manuals for LUNA 16

Brands by name

Popular brands

MADRIX LUNA 16, User Manual

Search results

Summary of Contents for LUNA 16

Reviews:

Related manuals for LUNA 16

Brands by name

Popular brands