MADRIX LUNA 16 User Manual Download Page 59

Page: 59 / 115

[Part 3] MADRIX 5 Software

//59

www.madrix.com

MADRIX LUNA User Manual

Assign Maximum Value -

Automatically assigns the

maximum value when using the controller.

- Click

Assign

and use the control on your controller for

the maximum value and the value will be set

automatically in the MADRIX 5 Software.

3.5

Input [sACN]

This topic includes:

DMX-IN Via Ethernet Network [Streaming ACN / sACN]

1] Initial Configuration

2] Windows Network Settings

3] Activating Streaming ACN

4] Enabling Input

5] Configure Your Device

6] Enable DMX-IN

7] sACN Input

DMX-IN Via Ethernet Network [Streaming ACN / sACN]

You can connect MADRIX LUNA over Ethernet network to the network card of your computer that runs the MADRIX 5

Software. Data is sent to the LUNA via the DMX-IN port and from the LUNA to the MADRIX 5 via Ethernet network.

1] Initial Configuration

Connect your external DMX controller to the DMX-IN port of MADRIX LUNA.

Connect MADRIX LUNA to power.

[Please see safety instructions in the

MADRIX LUNA Technical Manual & Quick Start Guide

Summary of Contents for LUNA 16




















































































































Search results

Summary of Contents for LUNA 16

Reviews:

MADRIX LUNA 16, User Manual, Page: 59 / 115

Search results

Summary of Contents for LUNA 16

Reviews: