Chapter 2
Installing the Backup PSU
6
Backup PSU Installation Guide
Prerequisites
This section lists the parts and tools you require to install the Backup PSU.
Note:
Before you attempt to power up the Backup PSU, read through the entire installation
procedure.
Parts and tools
To install the Backup PSU, you need the following parts and tools:
•
3/8 in. flat-blade screwdriver for the installation screws
•
1 electrostatic discharge (ESD) cord and wrist strap
Associated manuals
When you have installed the Backup PSU according to the instructions in this manual, refer to the
Collage 740 Backbone ATM Switch User Guide (part number: 100-239) for information about setting up
and managing the Collage 740.
The Collage 740 is a software-upgradable product, which means you can expand the functionality of
the switch by downloading new microcode software. The Collage 740 Backbone ATM Switch User Guide
contains information about configuring the Collage 740 with a particular software release. Make sure
the manual is up-to-date for the software release that you have downloaded to the Collage 740.
install.fm4 Page 6 Tuesday, August 13, 1996 2:05 PM
