Chapter 2
Installing the Backup PSU
100-240-01
11
Insta
lling the
Backup
PSU
Connecting the power cables
When you have mounted the Backup PSU in a rack, connect the unit to the Collage 740, then
connect it to the AC outlet with the power cables provided.
Figure 2.1
Sockets on the rear panel of the Backup PSU
The Backup PSU package contains one mains cable and one DC power cable. You need one mains
cable and one DC power cable for each Collage 740 you connect to the Backup PSU.
You can connect the Backup PSU to one Collage 740 for each PSU Module that is installed. The
Backup PSU supports a maximum of two PSU Modules, enabling you to connect it to a maximum of
two Collage 740s.
Note:
To connect the Backup PSU to a second Collage 740, you will need one additional
PSU Module (part number: 57-77) and one additional cable set (part number: 57-98).
install.fm4 Page 11 Tuesday, August 13, 1996 2:05 PM
