Connecting to the AC outlet
To power the BOOMER
What you will need
●
AC power cord (included)
●
Surge-protector (recommended) or a power outlet
Note: Before turning on the power make sure the red voltage selector [Fig. A] under
the AC input is set to the proper voltage. It should be set to 115V for North America
and 230V for most European countries. Make sure you know the proper voltage for
your region before turning on the BOOMER.
1.Connect the AC end of the power cord into the AC input on the rear panel of the BOOMER
2.Connect the other end to a surge-protector or available power outlet
Connecting to a TV / video monitor with a RCA input
What you will need
●
1 RCA-style video cable (included)
●
TV / video monitor with a RCA video input
1.Connect one end of the RCA video cable to the yellow Video Out on the rear panel of the BOOMER.
2.The BOOMER has two RCA-type VIDEO OUTPUT jacks for connecting to TVs or monitor devices.
Both VIDEO OUTPUTS can be connected simultaneously.
3.Connect the other end of the RCA video cable to the Video Input on a TV / video monitor
4
[Fig. A]
Basic Connections
Since the BOOMER contains built-in power amplifiers, speakers, DVD/CDG/CD player, USB player, and SD
card player, the BOOMER can be used as a self-contained sound system. However, the BOOMER contains
various audio video outputs to allow the BOOMER to be connected to multiple TV sets, external sound
systems, and/or multiple sound effect devices. The following content demonstrates the procedures for
connecting the BOOMER to the AC outlet and other audio video devices.
230
VOLTAGE SELECTOR
TV
TV
www.karaoke.at
