TH8750150
20-02-2015
MAD Disc Aligner
DA8700
en
21
Fitting Mounting Adapter
5.
Fitting the Lathe on the adapter
Fig. 44
Fig. 45
1. Bring the Lathe into correct position, Fig. 39.
2. If necessary mount the Lathe upside down, Fig. 44-45.
3. Mount the Lathe on the slide piece by using the hand knobs.
4. Position the lathe so that the Lathe centerline is aligned with the brake rotor cen-
terline. Fig 41-43.
5. Ensure the Lathe does not make contact with the brake rotor.
6. To secure the slide piece to the mounting bracket, tighten one of the hex-head
bolts using the hex T-spanner wrench provided.
7. Tighten all brake caliper bolts in the following order, to the specified torque:
M10 mounting bolts or larger (original brake caliper bolts): torque to 50 Nm (37
Ft-Lbs) (red mounting adapter).
b. M8 mounting bolts: torque to 25 Nm (18 Ft-Lbs).
c. M9 mounting bolts: torque to 30 Nm (22 Ft-Lbs).
d. Hand knobs: torque to 50 Nm (37 Ft-Lbs).
e. Mounting adapter hex-head bolts: torque to 25 Nm (18 Ft-Lbs).
8. Verify the brake rotor rotates freely with no parts dragging or coming in contact
with other parts.
Fig. 43
Fig. 41
Fig. 42
O.K.
X
X
