Page 13 of 19
405-0680 Rev B
2/6/2020
MR1400
MAD-RAMPS Pivoting Ramp System
Installation Instructions
MAD-RAMPS LOADING AND UNLOADING PROCEDURES
LOADING YOUR ATV OR UTV WITH MAD-RAMPS
Step 1:
Unlock and lower the tailgate on your truck. Extend the Driver-Side Aluminum Ramp by pulling
the spring-tension pin to release the Driver-Side Aluminum Ramp from the Driver-Side Pivot Cage
(Figure 1). Pull the ramp away from the truck until it is fully extended and the spring-tension pin is
engaged with the pre-drilled hole in the aluminum ramp (Figure 2). Repeat the process with the
Passenger-Side Aluminum Ramp and the Passenger-Side Pivot Cage.
Figure 1
Figure 2
Step 2:
Drive your machine up to MAD-RAMPS, but stop before the front tires come in contact with either
aluminum ramp. Adjust the ramps by them sliding along the Pivot Bar so they line up with the wheel
width of your ATV or UTV, as shown in Figure 3.
Figure 3
