Page 16 of 19
405-0680 Rev B
2/6/2020
MR1400
MAD-RAMPS Pivoting Ramp System
Installation Instructions
Step 3:
NOTE: There is no need to adjust the ramps for wheel width prior to unloading. The weight of
your machine holds the Pivot Cages and Aluminum Ramps in place during transportation.
Start your machine, and disengage the parking brake. Slowly reverse your machine over the Pivot
Bar. This will allow for a smooth transition as the ramps lower to the ground (Figure 2). Continue to
reverse until your front tires are completely off of the ramps.
Figure 2
