3
12.
Do not overreach. Keep a proper footing balance at all times. Proper footing and balance
enables better control of the tool in unexpected situations. Follow instructions in this book of
proper chasing positions.
13.
Store idle MACROZA SC-100 in a dry safe place under lock and key and out of reach of
children. Do not allow persons unfamiliar with the chaser machine or these instructions to
operate the power tool. Tools are dangerous in the hands of untrained users.
14.
Avoid accidental starting. Make sure the switch is off before plugging in. Do not carry
MACROZA SC-100 with your finger on the switch. In case an unexpected jam occurs, switch
the power tool off and unplug it from the mains socket.
15.
Remove adjusting tools and attachments before turning MACROZA SC-100 on. A wrench
or a key that is left attached to a rotating part of the machine may result in personal injury.
16.
Disconnect the plug from the power source before making any adjustments, changing
accessories or storing the MACROZA SC-100. Such preventive safety procedures will reduce the
risk of starting the machine accidentally.
17.
Do not overload the MACROZA SC-100 as it will work more safely and efficiently within
the indicated power range. Do not use this wall chaser on extremely hard materials such as
concrete or stone.
18.
Do not force the tool. Use the correct tool for your application. The correct tool will do the
job better and safer for which it is designed.
19.
Do not use MACROZA SC-100 if the switch does not turn on and off. It must be repaired
immediately.
20.
Maintain MACROZA SC-100 with care. Keep power tool clean and milling cutter sharp to
ensure perfect working condition.
21.
All moving parts should be periodically inspected together with the cord and cutter
protective cover.
22.
Keep handles clean and free from grease and oil. Properly maintained tools reduce risk of
personal injury.
23.
Warning! Use only MACROZA original parts. Failure to do so may lead to personal injuries.
24. Before starting the job, check for damages or breakages and any other condition that may
affect the operation of the wall chaser or moving parts. If damaged, service the MACROZA SC-
100 before using it. Many accidents can be caused by poorly maintained tools.
25.
Always use approved MACROZA service centres for maintenance. Have power tool service
by a qualified repair person. This will ensure safety of the machine is maintained.
26.
MACROZA SC-100 is designed in accordance with these instructions and in the manner
intended for the particular type of job. All maintenance should carry out by a specialist and
using only MACROZA original spare parts.
27.
The MACROZA SC100 chaser machine should not be used to perform work for which it has
not been designed (for example, to cut wood). Use of chaser machine for operations different
from those intended could result in a hazardous situation.
