7
The MACROZA SC100 chaser machine’s cutting attachment is a widia-tipped (Carbide
Tungsten) milling cutter.
It is used with seven different types of milling cutters depending on the measure of chase
required (depth x width):
NOTES:
Cut width and depth might vary depending on milling cutter’s level of wear.
• For cuts wider than 50 mm, make two parallel cuts side by side
• For gear or switch boxes, make two additional parallel cuts on each side of the existing cut.
RZ-105:
30mm x 30mm
RZ-125:
40mm x 40mm
RZ-10:
25mm x 25mm
RZ-150:
50mm x 50mm
RZ-11:
35mm x 25mm
RZ-12:
45mm x 15mm
RZ-115:
35mm x 35mm
MILLING CUTTERS
