Macrovision Corporation 17W29U User Manual Download Page 79

Page: 79 / 212

BIOS Utilities

Main Menu 5 - 7

IDE Primary/Master (Main Menu)

Pressing

Enter

opens the sub-menu to show the configuration of a HDD on the com-

puter’s IDE Primary/Master Channel. Use the

Auto

(Type:) setting to have the items

configured automatically for you.

IDE Secondary/Master (Main Menu)

Pressing

Enter

opens the sub-menu to show the configuration of an optical Device

on the computer’s IDE Channel 1. Use the

Auto

(Type:) setting to have the items

configured automatically for you.

System/Extended Memory: (Main Menu)

This item contains information on the system memory, and is not user configurable.
The system will auto detect the amount of memory installed.

BIOS Revision/VGA Card etc. (Main Menu)

This item contains information on the BIOS version and video card etc., and is not
user configurable.

Summary of Contents for 17W29U





















































































































































































































Search results

Summary of Contents for 17W29U

Reviews:

Related manuals for 17W29U

Brands by name

Popular brands

Macrovision Corporation 17W29U, User Manual

Search results

Summary of Contents for 17W29U

Reviews:

Related manuals for 17W29U

Brands by name

Popular brands