Mackie TT24, Quick Start Manual

Page: 14 / 130

Mackie TT24 Digital Live Console Quickstart Guide TT24 Interface
14
2.3 V
-
Pot Control Area
The buttons to the right of the channel faders (Figure 2-2) selects the current
function for the channel V-Pots from the following:
• PAN: Left/Right and LCR panning control
• TRIM: Digital Trim has a range of
±
15 dB
• METERS: High-resolution channel metering. Push the V-Pot and the
meter reverses to display compressor gain reduction. Rotate the knob to
control the threshold settings.
• HPF: Push the V-Pot to engage/disengage the HPF; rotate the knob to ad-
just frequency between 20–400 Hz.
• AUX SENDS 1–12: Rotate the V-Pot to control send level; push the V-Pot
to toggle pre/post fader for that send.
• AUX PAN: Control panning of stereo linked axes
• AUX MODE: Aux mode is the only blue button on the console and effectively
turns the TT24 into a powerful, dedicated monitor mixer by providing aux
mixing on the faders. In this mode, the 24 channel faders act as channel aux
sends and the 4 group faders act as auxiliary master sends.
2.4 QuickMix Area
The upper-right of the console, below the 5.5-inch Touchscreen, is called the
QuickMix area (Figure 2-3). It consists of 12 push-button rotary encoders and
eight buttons, which provide fast navigation of the QuickMix section
It is important to note:
• The only adjustable controls on the Touchscreen are buttons that toggle a
value on/off. All knobs represented on the Touchscreen are controlled by
corresponding QuickMix knobs. If any of the 12 knobs are missing from the
Touchscreen, the corresponding QuickMix knob has no function.
• Any Touchscreen knob colored white instead of black denotes a dual func-
tion available by pushing the corresponding QuickMix knob. This function
varies with the control.