Mackie TT24 Quick Start Manual Download

Page: 126 / 130

Mackie TT24 Tech Note

Wireless Remote Control

Procedure

1. Confi gure your TT24 and the host PC (see the TT Control installation

instructions on the CD supplied with your TT24).

2. Confi gure your wireless network for both your client and host PCs.

3. Enable the computer connected to the TT24 to be the Windows Remote

Desktop host. You must be logged on as an administrator or a member of
the Administrators group to enable Remote Desktop.

a. Open the System folder in Control Panel. Do this by clicking Start,

pointing to Settings, clicking Control Panel and then double-clicking
the System icon.

b. On the Computer Name tab, write down the name listed as the “Full

computer name;” you will need this later. (In the screen shot below,
the host PC is called “tt-test-speedy.”)

Summary of Contents for TT24


































































































































Search results

Summary of Contents for TT24

Reviews:

Related manuals for TT24

Brands by name

Popular brands

Mackie TT24, Quick Start Manual

Search results

Summary of Contents for TT24

Reviews:

Related manuals for TT24

Brands by name

Popular brands