Mackie TT24, Quick Start Manual

Page: 23 / 130

Mackie TT24 Digital Live Console Quickstart Guide Quickstart Tutorial
23
Engage and adjust the variable high
-
pass filter
17. Press HPF in the V-POT CONTROL area (Figure 3-2).
Now the high-pass filter can be adjusted with the channel V-Pots.
18. Engage the high-pass filter by pressing channel 1’s V-Pot knob so the
bottom red LED lights.
19. Rotate the V-Pot to adjust the filter in the range 20–400 Hz to remove
unwanted low frequencies.
3.3 Connect a CD/Tape Device
This section illustrates how to connect a CD/tape device to the dedicated CD/
TAPE A or B connectors (A = RCA, B = TRS), and to channels 23/24 to demon-
strate stereo linking and channel strip processing.
Connect CD to CD/Tape input
1. Connect the CD player into CD/TAPE A or B (Figure 3-1).
2. Press the UTIL button (Figure 3-4).
Figure 3-6 Stereo input assign
3. Touch STEREO INPUT ASSIGN on the Touchscreen (Figure 3-6).
4. Touch TAPE/CD A or TAPE/CD B in the INPUT SELECTION area
(Figure 3-6).
5. Touch to activate L/R in the GRP ASSIGN area to route the mains.
6. Adjust MUTE and SOLO from the Touchscreen.
7. Adjust the stereo input fader to desired level from its QuickMix knob.
Stereo
Input
Assign