background image

Owner

’s Manual

27

Owner’s Manual

SRM V-Class Loudspeakers Specifications Continued…

Construction Features

Basic Design 

 

Asymmetrical

Enclosure Material   

 

Black Polypropylene

Enclosure Finish   

 

Light Black Texture

Grille Material 

 

16-18 gauge perforated steel  

w/nylon net backing

Grille Finish 

 

 

Powder-coated black

Handles   

 

One [SRM210], 

 

 

 

two on each side and one partial  

on top[SRM212 and SRM215]

Display LEDs 

 Front 

   Power 

Signal 

 Rear 

   Speaker 

Control

Operating Temperature 

 

0 – 40 ˚C 

 

 

 

32 – 104 ˚F

Physical Properties

SRM210:

 

Height:    

 

23.0 in / 584 mm

 

Width:    

 

15.1 in / 384 mm

 

Depth:    

 

12.9 in / 328 mm

 

Weight:    

 

30.9 lb / 14.0 kg

SRM212:

 

Height:    

 

25.9 in / 658 mm

 

Width:    

 

15.2 in / 386 mm

 

Depth:    

 

14.2 in / 361 mm 

 

Weight:    

 

40.6 lb / 18.4 kg

SRM215:

 

Height:    

 

28.8 in / 732 mm

 

Width:    

 

17.6 in / 447 mm

 

Depth:    

 

15.4 in / 391 mm 

 

Weight:    

 

48.9 lb / 22.2 kg

Mounting Methods:

Floor mount, pole mount via the built-in socket on the bottom  

of the cabinet [Be sure the pole is capable of supporting  

the weight of the SRM | V-Class loudspeaker] or fly via  

the integrated M10 mounting points (using M10 x 1.5 x 20 mm  

forged shoulder eyebolts).
See pages 23–24 for more information.

Options

SRM210 Cover 

 

P/N 2036809-54

SRM212 Cover 

P/N 2036809-55

SRM215 Cover 

 

P/N 2036809-56

SRM210 Rolling Bag 

 

P/N 2036809-57

SRM212 Rolling Bag 

P/N 2036809-58

SRM215 Rolling Bag  

P/N 2036809-59

T100 Loudspeaker Tripod Stand 

P/N 2052464

SPM400 Loudspeaker Pole Mount 

P/N 2051055

PA-A2 Eyebolt Kit   

P/N 2051054

Disclaimer

Since we are always striving to make our  products better  

by incorporating new and improved materials, components,  

and manufacturing methods, we reserve the right to change  

these specifications at any time without notice.
The “Running Man” figure is a registered trademark of LOUD  

Audio, LLC.
All other brand names mentioned are trademarks or  registered 

trademarks of their respective holders, and are hereby  

acknowledged.
©2020 LOUD Audio, LLC. All Rights Reserved.

Summary of Contents for SRM210 V-Class




































Reviews: