Owner’
s Manual
3
Owner’s Manual
iP Series Install Performance Loudspeakers are
designed exclusively for a wide range of installed
sound reinforcement applications. Behind each
iP loudspeaker’s clean, professional look are high-
output, custom-designed woofers and premium 1.4"
titanium diaphragm compression drivers delivering
rich, articulate full-bandwidth response. Ample rigging
points support vertical and horizontal rigging and a
choice of Neutrik
®
or terminal connections provides
install flexibility. Optional ceiling and wall mounts are
available for aesthetically demanding venues. Plus,
the companion iP-18S 18" subwoofer is perfect for
additional low-frequency response and output in larger
applications. Add the SP260 speaker processor with iP
presets for quick setup and flawless sonic performance.
Introduction
Contents
IMPORTANT SAFETY INSTRUCTIONS ........................ 2
CONTENTS .............................................................. 3
INTRODUCTION ...................................................... 3
FEATURES ............................................................... 3
HOW TO USE THIS MANUAL .................................... 4
GETTING STARTED ................................................... 4
THINGS TO REMEMBER ........................................... 4
HOOKUP DIAGRAMS............................................... 5
PLACEMENT ............................................................ 7
ROOM ACOUSTICS .................................................. 7
RIGGING ................................................................ 8
PROTECTION ........................................................ 10
AMPLIFIER POWER ............................................... 10
RECOMMENDED POWER RATINGS ......................... 10
PREVENTING LOUDSPEAKER DAMAGE ................... 10
APPENDIX A: SERVICE INFORMATION .................... 11
APPENDIX B: CONNECTIONS ................................. 12
APPENDIX C: SPECIFICATIONS AND DIMENSIONS ... 13
LIMITED WARRANTY ............................................. 15
Features
iP Full-Range Models:
• Low-profile installation loudspeaker.
• High-output ceramic woofer with voice coil for
maximum output.
• iP-10 – 10" woofer / 2" voice coil
• iP-12 – 12" woofer / 2.5" voice coil
• iP-15 – 15" woofer / 2.5" voice coil
• 1.4" titanium compression driver provides smooth,
consistent high-frequency response.
• 8 × M10 rigging points and rotatable 90° × 50° horn
for vertical/horizontal rigging (PA-A2 accessory).
• Optional ceiling and wall mount accessories meet
the needs of the most aesthetically demanding
venues (iP-CM100 & iP-WM100 accessories).
• Rotatable center logo allows for clean presentation
in all configurations.
• Convenient terminal strip connectivity saves time
and cost.
• Dual Neutrik
®
parallel connectors.
• Lightweight, compact and durable 15mm poplar
cabinet construction.
• Companion iP-18S 18" subwoofer extends
low-frequency response and increases output
in larger applications.
• Optional SP260 2 × 6 speaker processor delivers
iP presets to get your system quickly dialed in.
iP-18S Subwoofer:
• 18" high-output installation subwoofer.
• 18" high-output ceramic woofer with 3" voice coil
for maximum output.
• Convenient terminal strip connectivity saves
time and cost.
• Dual Neutrik
®
parallel connectors.
• Lightweight, compact and durable 15mm poplar
cabinet construction.
• Optional SP260 2 × 6 speaker processor delivers
iP presets to get your system quickly dialed in.
Like us
Follow us
Watch our dang videos
