background image

iP Series Loudspe

ak

ers

14

iP Series Loudspeakers

iP-15

System

Type: 

 

Two-way, full-range loudspeaker

Frequency Range (–10 dB):    

40 Hz – 20 kHz

Horizontal Coverage Angle:    

90˚

Vertical Coverage Angle:  

 

50˚

Nominal Impedance:  

 

8 ohms

Power Handling:    

300 watts continuous 

600 watts program 

126dB-SPL max output

Crossover Frequency:  

 

2.5 kHz

Transducers

Low Frequency:     

15" / 381 mm woofer, vented

High Frequency:    

 

1.4" / 35 mm titanium 

dome compression driver

Physical

Input / Output Connectors:    

2

×

 Neutrik NL4MP 

2-point screw terminal strip

Enclosure:  

 

15 mm poplar w/ lightly textured 

black paint

Dimensions
 

Height:    

 

26.7 in / 677 mm

 

Width:    

 

17.5 in / 445 mm

 

Depth:    

 

17.4 in / 441 mm

 

Weight:    

 

45.2 lb / 20.5 kg

iP-18S

System

Type:  

Subwoofer

Frequency Range (–10 dB):    

35 Hz – 150 Hz

Nominal Impedance:  

 

8 ohms

Power Handling:    

400 watts continuous 

800 watts program 

132dB SPL max output

Internal Low Pass Filter:   

115 Hz

Transducers

Low Frequency:     

18" / 457 mm woofer, vented

Physical

Input / Output Connectors:    

2

×

 Neutrik NL4MP 

2-point screw terminal strip

Enclosure:  

 

15 mm poplar w/ lightly textured 

black paint

Dimensions
 

Height:    

 

22.9 in / 581 mm

 

Width:    

 

22.2 in / 565 mm

 

Depth:    

 

23.9 in / 608 mm

 

Weight:    

 

58.8 lb / 26.7 kg

LOUD Technologies Inc. is always striving to improve our products by incorporating new and improved materials, components, and manufacturing 
methods. Therefore, we reserve the right to change these specifications at any time without notice. The “Running Man” is a registered trademark 
of LOUD Technologies Inc. All other brand names mentioned are trademarks or registered trademarks of their respective holders, and are hereby 
acknowledged. ©2014 LOUD Technologies Inc. All Rights Reserved.

iP-15 Dimensions

iP-18S Dimensions

26.7 in /

678 mm

17.4 in /

442 mm

17.5 in /

445 mm

22.9 in /

582 mm

23.9 in /

607 mm

22.2 in /

564 mm

Summary of Contents for iP-10

















Reviews: