Mack V-MAC IV, Operator'S Handbook Manual

Page: 92 / 133

84 V-MAC Co-Pilot Operator's Manual
Driver's ID Screens
The following screens allow a driver specific ID to be entered via the Driver
Information Display. This option allows various vehicle information to be recorded
for the driver associated with the driver ID. The ID can be changed from the Driver
Information Display (DID) using the stalk switch control lever.
If the vehicle has the Driver ID feature, when the vehicle is started the Enter Driver ID
screen appears in the DID. The operator enters the appropriate driver ID at that time.
1 The first number will be highlighted in the DID screen. Use the up and down
arrows of the stalk switch control lever to scroll to the appropriate number.
2 Once the correct number is found, press the Enter button on the stalk switch
control lever.
3 The next number in the Driver ID sequence is highlighted. Enter all the numbers
for the Driver ID using these steps.
W3067466
https://truckmanualshub.com/