Mack V-MAC IV, Operator'S Handbook Manual, Page: 103 / 133

V-MAC Co-Pilot Operator's Manual 95
CO-PILOT® MENU SCREENS
Main Menu — Stationary Vehicle
The MAIN MENU screen consists of two screens for a stationary vehicle: stationary
MAIN MENU 1 screen and stationary MAIN MENU 2 screen.
To cause the stationary MAIN MENU 1 screen to appear, press and hold the stalk
switch
Enter (
↵ ↵ ↵
) button when in the CURRENT CONDITIONS screen (see). To
cause the stationary MAIN MENU 2 screen to appear, scroll down on the stalk switch
Up & Down button.
W3036587
Figure 42 — Stationary Main Menu Screens
From these two menus, the driver can access the following information supplied
in a submenu structure:
•
Fuel Economy (Anytime and Stationary Screens)
•
Trip Information (Anytime and Stationary Screens)
•
Gauges (Anytime and Stationary Screens)
•
Fleet Management (Stationary Screens)
•
Diagnostics (Stationary Screens)
•
Maintenance (Stationary Screens)
•
Integrated Temp-A-Start (if available; for future support)
•
Driver Event Messages (Stationary Screens)
•
Settings (Stationary Screens)
Note: To view any of the above submenus from the stationary Main Menu screens,
use the stalk switch Up & Down button to highlight an item and then press the stalk
switch Enter ( ↵ ↵
↵
) button to make your selection.
Also included in the stationary MAIN MENU 1 is the selection of a black-out panel.
Detailed information on these submenus and their screens is available in and .
https://truckmanualshub.com/