Mack V-MAC IV, Operator'S Handbook Manual, Page: 93 / 133

V-MAC Co-Pilot Operator's Manual 85
Once the Driver ID has been entered press the Enter button on the stalk switch control
lever. The
Command Accepted
screen displays. Press
Enter
again.
W3067469
If driver does not enter the Driver ID after starting the vehicle the Enter Driver ID
screen displays. The Driver ID should be entered at the next vehicle stop. This screen
will display every 30 minutes until the proper ID is entered. There is also an audible
warning emitted until the Driver ID is entered as well.
W3067466
https://truckmanualshub.com/