Mack TerraPro LEU 2010, Operator'S Handbook Manual

Page: 197 / 225

186 MAINTENANCE AND LUBRICATION
TOWING
Tow pins, hooks, eyes, etc., are located in or behind the front bumper. These
devices meet the recommendations for towing set forth by the Technology and
Maintenance Council (TMC) of the American Trucking Association and can be
used for towing a disabled vehicle from the immediate location.
If it is necessary to remove the tow pin, remove the retainer clip first. Once the
retainer clip is pulled, the tow pin can be lifted out of the bumper hole.
CAUTION
Do NOT lift and tow any vehicle by tow pins, hooks, eyes, etc. If the vehicle is mired
in heavy mud, snow, etc., use a suitable sling-type towing arrangement.
Note: Tow pins, hooks, eyes, etc., are NOT intended for use as long-term towing
devices.
CAUTION
Failure to disconnect the driveshaft, remove the drive axle shaft(s) or lift the drive
wheels off the ground before towing or pushing the vehicle, can cause serious
transmission damage.
DANGER
If the drive shaft has been removed for towing, DO NOT reuse bearing retainer
bolts or stamped strap bolts, or stamped straps. Reuse of bearing retainer bolts
or stamped strap bolts, or stamped straps can cause driveline failure, which can
result in separation of the driveline from the vehicle. A separated driveline can
result in property damage, serious personal injury or death.