104 OPERATION
Unfastening Seat Belt
Push down on the button to release the belt.
Seat Belt Maintenance
• Keep belt clean and dry.
• Clean with mild soap solution and lukewarm water.
DANGER
Do NOT bleach or dye belt, as this may cause severe loss of strength. Do NOT
install belt in a truck with a weakened floor until the floor has been replaced
or reinforced.
• Periodically inspect the following areas and replace any inadequate parts:
Buckle and Latchplate —
The buckle and latchplate should mate easily
with a solid click and release easily and quickly with moderate pressure on
the release button. All metal seat belt components should be free of signs of
damage, corrosion or rust.
Webbing —
The webbing should show no signs of wear, fraying or holes, and
it should be reasonably free of dirt which could find its way into the retracting
mechanism.
Retractors —
The retractors should function smoothly and maintain
an appropriate amount of tension. Loose webbing is an indicator that
maintenance is needed; it’s likely that a too-loose belt will fail to tighten
properly when necessary.
Seat Belt Mounting Components —
The tethering should be free of wear
and debris; the webbing should show no signs of wear, fraying or holes; and
the metal components should be free of signs of damage, corrosion or rust.
DANGER
Seat belt assemblies must be replaced after an accident if they have been
subjected to loading by occupants (even if no damage is obvious), or if they have
been damaged by an accident (bent retractor, torn webbing, etc.). If there is any
question regarding belt or retractor condition, replace the appropriate part.
Summary of Contents for TerraPro LEU 2010
