Mack TerraPro LEU 2010, Operator'S Handbook Manual

Page: 103 / 225

92 OPERATION
C0029617
1. Cab Full Tilt Position
6. To raise the cab to the full tilt position, pump the cab up past the balance
point. Note that the cab will descend by itself, although the rate of descent
may be controlled by manipulating the pump control lever from the RAISE to
LOWER position.
Lowering the Cab
Note: Before lowering the cab, the cab safety prop must be in the stored position and
the transmission must be in NEUTRAL.
1. Move the pump control lever to the LOWER position.
2. Pump until the cab is past the balance point and allow the cab to descend
and latch.
3. Leave the pump control lever in the LOWER position while the vehicle is
in operation.